Masterbatches

We offer Masterbatches in vast motley. We are counted in the list of prodigious Masterbatches manufacturers and suppliers set in India. The color Masterbatche manufactured by us was a huge hit in the market. Our color masterbatches have a wide range of application.

Wide range based on PE and PP, reinforced with fillers such as Calcium Carbonate and Talc, available in various colours. Applications include Raffia Tape, films, moulded and extruded plastic products.

Kalpana's Filler Masterbatches are produced from ultra-fine calcium carbonate and/or talc, premium quality polyethylene resins and proprietary additive packages.

In raffia tapes and PP Strapping tapes
Kalpana's Filler Masterbatches exhibit the following advantages.

Reduced tape hairiness and fibrillation during splitting, winding and weaving operations.

Better compatibility and evenness of dispersion with HOPE/PP polymers allows an increase in stretch ratio hence increase in tenacity and orientation.

Reduced dimensional variation of tapes.

Improved printability, welding and lamination.

Superior cost reduction

In Blown film application
Kalpana's Filler Masterbatches exhibit and offer the following advantages.

Antiblocking.

Better compatibility with HM/HOPE hence better strength properties ofthe film.

Better printability and welding

Superior cost reduction

In Injection and Blow Moulding applications
Kalpana's Filler Masterbatches offers the following benefits.

Better parison control, dimensional stability (less shrinkage and warpage), mould release and surface finish

Improved mechanical properties

Faster cooling rate and hence shorter cycle time.

Better printability

Cost reduction

The information given in this document is believed to be reliable and is given in good faith but without warranty. The user should test the product to ascertain the suitability for the intended use. Product specification or the whole document is subject to change without any prior notice.

Grade	Application	Recommended Dose
AF7030	PP/HDPE Woven Bag	4-20%
AF6040	PP/HDPE Woven Bag	10-30%
AF(HL)	PP/HDPE Woven Bag	20-40%
AFT(HM)	Blown Film (Semi-Transparent & Opaque)	10-40%
TPT(HM)	Blown Film (Transparent)	10-20%
AFT(BM)	Injection & Blow Moulded Containers	10-15%
AF(RT)	Roto-moulded Containers	10-15%

-	-	-	Typical Value	Typical Value	Typical Value	Typical Value	Typical Value	Typical Value	Typical Value
Property	Test Method	Unit	AF7030	AF6040	AF(HL)	AFT(HM)	TPT(HM)	AFT(BM)	AF(RT)
Melt Flow Index @ 190°C, 2.16kg	ASTM D1238	g/10 Minutes	3-6	2-6	2-4	2-3	<1	2-3	3-6
Specific Gravity @ 25°C	ASTM D792	-	1.88±0.05	1.78±0.05	1.62±0.05	1.72±0.05	1.78±0.05	1.72±0.05	1.89±0.05
Whitenes Index	CIE GANZ 82	-	>55	>55	>55	>55	>55	>55	>55
Moisture Content	ASTM C25	%	<0.2	<0.2	<0.2	<0.2	<0.2	<0.2	<0.2

ENQUIRY FORM
Contact Information * fields are mandatory
Contact Person *
Company Name
Address *
Country *
Email ID *
Phone Number *
Fax
Enquiry Details
Enquiry For
Details *

Masterbatches

ENQUIRY FORM